{"product_id":"singxer-su-6","title":"Singxer SU-6","description":"\u003cdiv\u003e\u003cstrong\u003eSingxer SU-6 \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eTechnical features:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSU-6 is a USB digital interface product using XMOS's new xCORE-200 series. The new generation of XMOS chips, using a more advanced process technology, doubled the performance of the old U8 chip, reaching a processing capacity of 1000MIPS.\u003c\/li\u003e\n\u003cli\u003eUsing high-speed full isolation design, it can very cleanly isolate the interference noise between the computer end and the interface. SU-6 adopts an extraordinary circuit design and uses high-speed PGA to reform the digital audio signal after isolation, so that the signal after the reformation is completely unaffected by the jitter of the isolation chip itself.\u003c\/li\u003e\n\u003cli\u003eThe SU-6 internal motherboard adopts a unified source synchronous clock technology. The PGA uses a dedicated algorithm to perform strict phase control on the clock signal and digital audio signal, which can ensure that the digital audio signal will not be delayed and phased after passing through the isolation chip. It is poor and there is additional distortion.\u003c\/li\u003e\n\u003cli\u003eSU-6 uses an expensive thermostat-level ultra-low jitter clock (femtosecond clock), two CCHD-957 crystal oscillators from Crystek.\u003c\/li\u003e\n\u003cli\u003eAs we all know, the core of digital audio is the algorithm. The Singxer team has worked in the field of digital audio for many years, and has received strong support from the XMOS AE team. We have made a number of technical improvements and algorithm optimizations based on the original firmware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSampling rate supported by each output interface:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCM: 44.1KHz, 48KHz, 88.2KHz, 96KHz,\u003c\/li\u003e\n\u003cli\u003e176.4KHz, 192KHz, 352.8KHz, 384KHz\u003c\/li\u003e\n\u003cli\u003e[I2S out and WCLK out support all sampling rates, S\/PDI and AES\/EBU support up to 384K, and optical fiber supports up to 192K]\u003c\/li\u003e\n\u003cli\u003eDSD: 2.8 MHz (DSD64)-DoP, native\u003c\/li\u003e\n\u003cli\u003e5.6 MHz (DSD128)-DoP, native\u003c\/li\u003e\n\u003cli\u003e11.2 MHz (DSD256)-DoP, native\u003c\/li\u003e\n\u003cli\u003e22.5 MHz (DSD512)-native\u003c\/li\u003e\n\u003c\/ul\u003e\n[I2S out supports all DSD formats, S\/PDI and AES\/EBU support DSD128 DOP mode, and optical fiber supports up to DOP64]\u003cbr\u003e\u003cbr\u003eBit width: up to 32 bit over I2S output\u003cbr\u003e\u003cbr\u003e Up to 24 bit over S\/PDI, AES\/EBU\u003c\/div\u003e\n\u003cp\u003e\u003cimg height=\"800\" width=\"800\" class=\"\" src=\"https:\/\/img.alicdn.com\/imgextra\/i4\/104310323\/O1CN01BAtAlw1EFyaANNz0y_!!104310323.jpg\" align=\"absmiddle\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eSpecification on Digital Interface:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe USB input socket is a standard USB-B type female socket, and the USB power supply range is 4.5V-5.1V;\u003c\/li\u003e\n\u003cli\u003eDC POWER input socket adopts DC2.1 socket and supports 7.5V-9V DC input (power supply requirement is 3A).\u003c\/li\u003e\n\u003cli\u003eBNC interface and RCA interface output standard S\/PDI signal, the level is 550mV (connected to standard load), and the output impedance is 75 ohms;\u003c\/li\u003e\n\u003cli\u003eThe XLR interface outputs standard AES\/EBU signals, the level is 3.3V (connected to standard load), and the output impedance is 110 ohms;\u003c\/li\u003e\n\u003cli\u003eThe word clock (WCLK) output adopts BNC interface, the level is TTL (without load), and the output impedance is 75 ohms;\u003c\/li\u003e\n\u003cli\u003eTwo HDMI-I2S signals are output through the HDMI socket. The four output signals include MCLK, BCLK, LRCLK, and SDATA signals, using standard LVDS differential levels, and the impedance is controlled at 100 ohms. Among them, the PIN13-15 of the HDMI socket is the DSD_ON signal. When the level is high, the I2S works in DSD mode, and the level is LVTTL; PIN18 is a 5V weak power output (the output current is less than 20ma), which can be used as an interface plugging indicator; 2 outputs The I2S line sequence is the same.\u003c\/li\u003e\n\u003cli\u003eThe I2S signal output by RJ45-I2S is a CMOS (5V) single-ended signal, low-impedance output, and the four output signals include MCLK, BCLK, LRCLK, and SDATA signals.\u003c\/li\u003e\n\u003cli\u003eThe optical fiber port outputs standard optical signals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg height=\"499\" width=\"868\" class=\"\" src=\"https:\/\/img.alicdn.com\/imgextra\/i1\/104310323\/O1CN01PvfMiz1EFya8arATe_!!104310323.jpg\" align=\"absmiddle\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eDigital reclock with external clock 10M:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003col\u003e\n\u003cli\u003eCarry out the design concept that electricity is the mother of sound, pay attention to the design of power supply circuit, adopt external DC input, built-in super capacitor power supply, and equipped with high-performance, low-noise and fast-response LDO. The whole board uses up to 6 independent LDO power supplies. The digital audio motherboard part is powered by a secondary LDO, and the clock part even uses ADI's ultra-low noise LDO, which lays a solid foundation for ensuring the output performance.\u003c\/li\u003e\n\u003cli\u003eIn order to ensure excellent electrical transmission performance, the XLR sockets are made of Swiss Neutrik, the USB-B sockets are made of TE, and the audiophile BNC and RCA coaxial sockets are customized products of major Taiwanese manufacturers. Even the fuses are made from the United States. Litteluse model.\u003c\/li\u003e\n\u003cli\u003eThe audio motherboard adopts a 4-layer circuit board design to ensure a complete ground plane and power layer, and a high-speed digital design method to ensure the signal integrity and power integrity of the entire board. The clock signal is specially processed, and the package design and precise impedance control are adopted to ensure the signal quality of the clock and improve its anti-interference ability.\u003c\/li\u003e\n\u003cli\u003eThe input and output signals follow the standard design, especially the USB high-speed signal adopts 90 ohm impedance control, and an anti-static TVS protection circuit is built-in; the I2S signal adopts the LVDS differential level standard, the impedance is controlled at 100 ohms, and the 4 outputs are all adopted. A separate LVDS driver.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003cstrong\u003eSystem compatibility:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWindows 7, Windows 8, Windows 10; 32\/64 bit, need to install special driver\u003c\/li\u003e\n\u003cli\u003eNative MacOS 10.6 and later, use the system's own driver\u003c\/li\u003e\n\u003cli\u003eNative Linux with UAC2 compliant kernel, using the system's own driver, (tested on Ubuntu and Daphile systems, based on INTEL X86 platform)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-spm-anchor-id=\"2013.1.0.i4.171d2ce9nBAkrD\"\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg height=\"411\" width=\"743\" class=\"\" src=\"https:\/\/img.alicdn.com\/imgextra\/i2\/104310323\/O1CN01OFq17N1EFyaEvs5vN_!!104310323.jpg\" align=\"absmiddle\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eHDMI -I2S interface output:\u003c\/strong\u003e\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003eLVDS differential signal with a level of 3.3V;\u003c\/li\u003e\n\u003cli\u003eDSD ON signal, 5V power supply (small current), MUTE signal internal PGA has been processed, there is no need to output MUTE signal;\u003c\/li\u003e\n\u003cli\u003eThe DSD ON signal can be defined by itself, and the DSD ON signal can be output to the PIN13, 14, 15, 16 pins of the socket at will.\u003c\/li\u003e\n\u003cli\u003eThe phases of PIN1-3 and PIN7-9 are adjustable, and the user can configure the phases of these two pairs of outputs through a switch.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003cstrong\u003eFlexible I2S and clock configuration:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSwitches 1-4 correspond to the PIN13-16 pins of the HDMI socket. Pull to the ON position, it means that the PIN pin has the output function of DSD_ON signal;\u003c\/li\u003e\n\u003cli\u003eSwitches 5 and 6 are the modes for configuring the clock output:\u003c\/li\u003e\n\u003cli\u003eWhen switch 5 is O, the clock outputs MCLK, and when it is ON, the clock outputs WCK;\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e Switch 6 configures the frequency of MCLK, when it is O, it is 22.5792M\/24.576M, when it is ON, it is 45.1584M\/49.152M;\u003cbr\u003e\u003cbr\u003e The configuration of switch 6 is valid for CLK OUT, RJ45-I2S, and HDMI-I2S.\u003cbr\u003e\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003eSwitch 7 can independently set the left and right channels in DSD mode in the I2S signal.\u003c\/li\u003e\n\u003cli\u003eSwitch 8 can set the line sequence of BCLK in I2S signal; when O, PIN4 is BCLK+, PIN6 is BCLK-;\u003c\/li\u003e\n\u003cli\u003eSwitch 9 can set the line sequence of LRCLK in the I2S signal; when O, PIN7 is LRCLK+, PIN9 is LRCLK-;\u003c\/li\u003e\n\u003cli\u003eSwitch 10 can set the line sequence of DATA in I2S signal; when O, PIN1 is DATA+, PIN3 is DATA-;\u003c\/li\u003e\n\u003cli\u003eNote: Coaxial, optical fiber, and AES\/EBU output are not affected by the above pull switch; the fixed line sequence of RJ45-I2S needs to adapt to different interfaces, and the user needs to customize the network cable.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003cstrong\u003eDiemension and packaging:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe length, width and height of the case: 238MM*170MM*46MM, excluding the height of the machine feet and the protruding part of the connector behind the case.\u003c\/li\u003e\n\u003cli\u003eThe weight of a single machine is about 1.6KG.\u003c\/li\u003e\n\u003cli\u003eThe length, width and height of the carton packaging: 350MM*230MM*110MM.\u003c\/li\u003e\n\u003cli\u003ePacking weight: 2.0KG\u003c\/li\u003e\n\u003cli\u003eAccessories: a USB cable, a power adapter (globally, support AC100V-240V), a power cord\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"center\"\u003e\u003cstrong\u003e\u003cbr\u003e所有客戶現在可以通過訪問online shop下訂單,  並通過Visa卡 \/ Master卡\/ PayPal\/ Apple Pay\/ Goggle Pay 在線直接付款, 接受一切國際訂單。\u003ca href=\"https:\/\/www.adark.co\/collections\/roon-music-server\/products\/afterdark-project-clayx-roon-karmann-music-server-x-elite-edition?variant=29466254770294\" target=\"_blank\"\u003eAfterDark網上商店.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv align=\"center\"\u003e\n\u003cbr\u003e\n\u003cdiv align=\"center\"\u003e\n\u003cdiv class=\"mbn\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0072\/3117\/6822\/files\/AfterDark._LEGO_FB_1dd66f28-dc17-4ab6-84c5-8dc158c8b0e1_480x480.jpg?v=1596933607\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AfterDark.","offers":[{"title":"100V","offer_id":39397551014006,"sku":null,"price":946000.0,"currency_code":"KRW","in_stock":true},{"title":"220V","offer_id":39397551046774,"sku":null,"price":946000.0,"currency_code":"KRW","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/3117\/6822\/products\/O1CN01D9XHIP1qTff4QVgSh__17455497.jpg?v=1628753874","url":"https:\/\/www.adark.co\/en-kr\/products\/singxer-su-6","provider":"AfterDark","version":"1.0","type":"link"}