[Emperor Triple Crown] TAU = 1sec 3.8E-13或更短（0.00038ppb / s）
輸出：10 MHz x 1系統，正弦波
機身尺寸：W141mm x D210mm x H90mm
外部直流電源：DC 5V/ 12V 1A推薦電壓
Features The product uses the selected audio grade OCXO, and through long-term calibration to select and install equipment with excellent stability.
OCXO that employs with qualitative measure equipment.
OCXO is enclosed and covered with Dynamat Extreme Corporation (Made in USA) which is used to stabilize and minimize heat separation, addition EMI material from KEMET EMI Shielding is placed on top of OCXO, the outer layer is covered with real leather to isolate the heat factors for maximizing OCXO performance .
Black Alu material + Carbon Fiber material front and backplate, solid anti-vibration. In addition, due to the thickness used, 3mm / 6mm Carbon Fiber material material with plate can provide solid EMI/ magnetic coverage.
Advanced instrument Symmetricom 5125A calibrated with plotted characteristics. The phase noise, and Allen Derivation defines different grades of the OCXO.
Audio Note Silver Solder
Duelund AC0.4 Silver Premium Audio Cable (Silver in Cotton / Oil impregnated) (Handmade in Denmark) (Internel DC cable only)
AfterDark. Project ClayX WoodMAT for best musical representation (Optional)
Hand made in Hong Kong
2 years warranty
Optional external LPS power supply
Optional 0.8m DC power cable made by Duelund Audio
AfterDark. Black Modernize External LPS power supply (Optional) This device is designed to operate only with external DC power. Make sure to prepare an external DC power supply. We recommend using our dedicated AfterDark. Black Modernize Linear Power Supply Carbon Fiber x NCF Edition
The external DC specification is 12V 2.5A.
The external DC plug standard is 2.1mm / 5.5mm.
The upgrade DC cable can be purchases separately.
Level selection value The OCXO installed in the product can calibrate the products used in industrial equipment for a long time, and use equipment with good characteristics. In order to optimally select the audio clock, we comprehensively evaluate with Symmetricom Flagship 5125A to analysis the phase noise characteristics and short-term stability (Allen dispersion) that can be determinate the OCXO grading accordingly.
The OCXO installed in this product uses a stable OCXO unit that has been calibrated for several months. In order to make the best choice of OCXO. We are conducting a comprehensive evaluation of phase noise characteristics and short-term stability (Allen dispersion) during detailed inspection.
The final product will final measured and fine tuned with Keysight 53220A with reference to Atomic Clock , GPSDO.
Quality of OCXO is determined by Phase Noise at 1Hz / at 10Hz Phase noise: -119 to -113 dBc / Hz or lower at 1 Hz offset (Grades) -137 dBc / Hz or lower at 10 Hz offset
Phase Noise@ 10Hz
Phase Noise@ 1Hz
Emperor Signature SE
Emperor CROWN SE
Emperor DOUBLE CROWN
Emperor TRIPLE CROWN
Emperor Giesemann EVA
Allan variance short-term stability reference value
[Emperor Giesemann EVA]TAU = 1sec 2.50E-13 or less（0.00025ppb / s）
[Emperor Giesemann] TAU = 1sec 2.78E-13 or less（0.00028ppb / s） [Emperor Triple Crown] TAU = 1sec 3.8E-13 or less（0.00038ppb / s）
Ultra-low phase noise OCXO 10MHz oscillator
Optional BNC cable.
Output: 10 MHz x 1 system, sine wave
Output impedance: 50 ohm
Body size: W141mm x D210mm x H90mm
Weight about 2.0 kg
Required External DC power supply: DC 5V/12V 1A
External DC plug standard: 2.1mm / 5.5mm
2 years free maintenance warranty
Design and specifications are subject to change without notice